Distributors of Glass pool fencing, frameless glass balustrade
and gate hardware accessories to the Western Australia market
Glass Balustrade Perth Online has developed a
reputation in the trade for supplying the highest quality tempered glass.
Absolute attention to detail in production, packing and quality control mean
clients can be assured of consistency of top quality products.
For more detailed information on our range of glass please
GLASS FACTORY: All steps of the production process reach the highest
Float Glass All glass is processed from the same float
glass supplier meaning that the quality and die batch of
glass remains consistent.
Glass Cutting Tables Bottero automatic cutting tables from Italy
are used to ensure precision cutting of float glass to
Double Edger Polishing
Machines High polish and blemish free edges give
frameless and semi-frameless glass the desired look.
Horizontal double edge polishing machines give the finest
edge finish. Quality control personnel check each sheet
of glass after polishing to ensure edges are to the
standards specified by Glass Outlet
Radius Corners 8 and 10mm thick
glasshas 2mm radius corners. An extra production
step is required to achieve this finish. Besides being
more aesthetically pleasing, the major benefit of the 2mm
radius corners is the reduction in the chance of chipping
a sharp pointed corner. Also, sharp corners can be a
12mm thick glasshas 5mm radius corners on all 4
corners. A 5mm radius corner again requires an extra
production step however the look achieved for frameless glass
is stunning. Such a radius corner provides an elegant finish to
the frameless glass look.
Tempering Oven Toughened glass is made from
annealed glassvia a thermal tempering process. The
glass is placed onto a roller table, taking it
through a furnace that heats it above its annealing
point of about 700 C. The glass is then rapidly
cooled with forced air drafts.
importance in glass processing is the
tempering furnace used. Glass
Balustrade Perth's glass is only
tempered with a Tamglass furnace
was made in the USA. Tamglass is
one of the world's leading tempering
Glass Balustrade Perth™s 8, 10 and 12mm
glass is tested and certified as complying with the
requirements of Australian and New Zealand Standard
2208:1996 - Safety Gazing Material in Buildings
Specification For safe transport, each sheet of glass is
separated by cork pads with every sheet having hard
plastic corner protectors shrink wrapped on. The
precaution of cork separators and 4 x plastic corner caps
per sheet of glass allows confidence that glass can be
safely transported long distance without fear of glass
touching and chipping or scratching.
At each stage of production (cutting,
polishing, drilling, tempering and packing) dedicated
Quality Control Personnel inspect each sheet of
glass. Glass identified as not conforming to the
highest quality is set aside.
In addition to skilled factory staff, Glass Balustrade
Perth retains an independent Quality Assurance firm to
review shipments prior to despatch. Random sampling of
glass is undertaken to ensure compliance with detailed
quality assurance specifications into glass surface finish,
edge finish, labelling identification, packing
specification and like. Quality assurance reports are
written and provided to Glass Outlet and the factory to
ensure the highest standards are continually achieved and
Our commitment is to ensure all products conform to
industry best practice in production and quality.